Bestseller Cultivator KPS, CCS and 8.4 for tractor T-150K c spring

The BEST Cultivator KPS, CCS and 8.4 for tractor T-150K c spring and roller Cultivator KPS, CCS and 8.4 for tractor T-150K c spring and rollers trailed KPS-4 and 8.4-number of arms with harrow and rollers (all as pictured). Delivery to farm - build -configure - run in the field. Cultivator for solid treatment Intended for continuous cultivation of the soil, for pre-treatment, as well as for loosening untreated stubble.

The advantages of the cultivator

• uniformity of treatment depth across the entire width and length of the seizure;

• smooth outsole of the treated area;

• alignment and partial compaction of soil;

• low probability of clogging elements;

• high performance processing;

• tough and durable frame design;

• simplicity and reliability in use.

Treatment cultivator in one pass to perform the necessary operations of tillage as in the main and pre-sowing cultivation (solid soil). Guaranteed high-quality processing of the soil cultivator and reliable design, easy maintenance and adjustment, high productivity, reasonable prices and quality wear cultivator working bodies with high resource exploitation – the key to timely carry out the necessary work with the highest quality and best result.

Technical characteristics of cultivator

Machine Type Semi-Trailer

Machining depth 5-15 cm

Length in working position 8000 mm.

Height in working position 2300 mm.

The type of work on ploskorezy hoe

The minimum distance between adjacent working bodies on the frame 230 mm.

The working width of the legs 310 mm.

The overlap of the legs 80 mm.

Standard equipment 3-row harrow with spring teeth

Optional plastic ice rink equipped with a step of~100 mm. with a diameter of 255 mm.

Clearance under the frame (from the sole of feet) of 700 mm.

The minimum distance between adjacent working bodies of 690 mm.

Weight with roller and harrow kg 4000 KG

KPS-4 80-90l.with
KPS is 8.4. 150-170hp.with

Productivity Ha/h (min) 6.7

The cultivator is made for semi-trailed scheme and is attached to the tractor by means of an adjustable height long towbar high stiffness, which minimizes the influence of the bias point of the trailer when the tractor and also significantly increases the maneuverability of the unit "tractor cultivator" in the turns.

Tillers with widths of up to 8.4 metres inclusive is equipped with four uniaxial wheeled mechanisms with a width of over 10 meters four mechanisms, equipped with a balancing two-wheeled carts with a center base 700 mm, which provides maximum stability of the cultivator when working and accurate treatment at a given depth.

Working clearance of the cultivator (from frame bottom to the sole of the foot) is 710 mm, together with 4-row (width up to 8.4 metres, inclusive) or 5 row ( width over 10 meters) placement of the working bodies with the smallest distance between adjacent in the row 690 mm fully eliminates clogging programnogo space stubble and plant residues. And with center-to-center distance 230 mm between adjacent during ploskorezy paws width 310 mm (mutual overlap of 80 mm) provided 100% podrazhaet any weeds.

Significant ( more than 120 kg on the toe of the leg) activation force of the safety spring allows you to work the soil a high degree of hardness at a predetermined depth.

Finishing provides three-row spring-tooth harrow and rear stripe roller 255 with an adjustable pressing force and a step track strips 100mm.

The range of the working depth is infinitely adjustable from 0 cm to 17 cm (and deeper).

Adjustment of the depth of the cultivator is provided with 4 screw clamps,changing the tilting angle of the hydraulic wheel mechanisms. Thus when the cylinders are completely closed during transportation – fully open. Regardless of the depth adjustment transport clearance will be greater than 300 mm. Access control elements convenient, as all points are located в2озле front beam of the cultivator.

Sectional device frame allows the wings to move to 5?7? up and down, making possible high-quality processing of slopes, depressions and hills, precisely copying the terrain.